Victoria Alternatives and Similar Software

Alternatives to Victoria for Windows, Linux, MS-DOS, Mac, Software as a Service (SaaS) and more. Filter by license to discover only free or Open Source alternatives. This list contains a total of 19 apps similar to Victoria.

Victoria - An experimental program to work with HDD. Victoria is a small application designed to assess performance, test and perform minor repairs to your IDE drive and SATA HDD. If you're looking for more info about Victoria like screenshots, reviews and comments you should visit our info page about it. Below you find the best alternatives.

The list of alternatives was last updated: 4/17/2017 4:40:00 AM

Alternatives to Victoria for all platforms with any license

  • HDD Regenerator

    The HDD Regenerator can repair damaged hard disks without affecting or changing existing data. As a result, previously unreadable and inaccessible information is restored. Detect physical bad sectors on a hard disk drive surface. Repair physical bad sectors (magnetic errors) on a hard disk surface. The product ignores file system, scans disk at physical level. It can be used with FAT, NTFS or any other file system, and also with unformatted or unpartitioned disks.

    • Discontinued The program is no longer updated since 2011, but it supports Windows 10 and can be still bought from the official website.

    Commercial $ $ $ Windows

    HDD Regenerator icon
  • HDAT2

    HDAT2 is program for test or diagnostics of ATA/ATAPI/SATA, SSD, USB and SCSI devices. HDAT2 program has 2 levels: Drive level testing - main function is testing and repair (to regenerate) bad sectors for detected devices - you get much information about detected devices File level testing - read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32 - check/remove (regenerates) bad sectors records, flags in FAT table

    Free Windows

    HDAT2 icon
  • HDD Low Level Format Tool

    HDD Low Level Format Tool is a utility for low-level hard disk drive formatting. - Supported interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, SAS, USB, FIREWIRE. - Big drives (LBA-48) are supported. - Supported Manufacturers: Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital, and almost any other not listed here. - The program also supports low-level formatting of FLASH cards (SD, MMC, MemoryStick and CompactFlash) using a card-reader.

    Free Personal $ $ $ Windows

    HDD Low Level Format Tool icon
  • SeaTools

    SeaTools is a diagnostic tool that helps you determine the condition of the disk drive in your external hard drive, desktop or laptop computer. The installation needs dot.NET 4 as a precondition. If dot.NET 4 is not installed, it must be installed before. Then in a further step the new dot.NET 4-installation must be updated, before you can install SeaTools. It includes several tests that will examine the physical media on your Seagate or Maxtor disk drive and any other non-Seagate disk drive.

    • Victoria tools are very good and don't hide small errors. SeaTools diagnosys is very basic: TEST ALWAYS PASS! Guest • May 2018 • 1 agrees and 0 disagrees Disagree   Agree

    Free Windows

    SeaTools icon
  • MHDD

    MHDD is the most popular freeware program for low-level HDD diagnostics. MHDD supports these interfaces: IDE, Serial ATA, SCSI. Also there is a possibility to access an USB storage, there are drivers for emulation (USB->SCSI). This software can make precise diagnostic of the mechanical part of a drive, view SMART attributes, perform Low-level format, bad sector repair, different tests and tens of other functions.

    Free Windows

    MHDD icon
  • DriveDx

    DriveDx is advanced drive health diagnostic and monitoring utility. Unlike most drive utilities, DriveDx does not only monitor the drive’s built-in S.M.A.R.T. status, but also analyzes the changes of all drive health indicators that are closely related to HDD or SSD failures (like the pending bad sectors, reallocated bad sectors, uncorrectable bad sectors, SSD wear out / endurance, and more) and alerts the user immediately if anything goes wrong.

    Commercial $ $ $ Mac

    DriveDx icon
  • DRevitalize

    DRevitalize is a program that repairs bad sectors (physical defects) on popular magnetic media (hard drives and also floppy drives to some extent) by generating a special sequence of high and low signals around the physically damaged area. The surface of almost any drive can be repaired with this utility (even hard drives that were dropped down or exposed to strong electromagnetic fields). For more informations please read the full documentation.

    Commercial Windows MS-DOS

    No features added Add a feature

    DRevitalize icon
  • StableBit Scanner

    StableBit Scanner is a state of the art disk health monitoring tool. - Monitors the SMART data of your disks, and presents them in an easy to read, meaningful way. - Lists detailed information about your disk, including the connection type, bus speed, and supported features. - Performs a surface scan of the disks to ensure that every sector of the disk is readable, once a month. - Can recover "damaged" files that are located where there is damage to the disk.

    Commercial Windows

    StableBit Scanner icon
  • WHDD

    HDD diagnostic and data recovery tool for Linux.

    Free Linux

    No features added Add a feature

  • Data Lifeguard Diagnostic

    This is a Windows version of the Data LifeGuard Diagnostics. It will test WD internal and external drives. In additional, it can provide you with the model and serial of WD drives attached to the system.

    • Discontinued The program seems to be no longer available on the company website. Last version, 1.29, released in November 2015, can be still downloaded from MajorGeeks

    Free Windows MS-DOS

    Data Lifeguard Diagnostic icon
  • Pc-Check

    Pc-Check® is your ready-to-use-now diagnostic software. With its self-booting start-up, you don’t have to worry about which operating system is installed. Pc-Check only tests the hardware you want it to. No gimmicks, no files touched, no brand names considered — just reliable hardware test results.

    Commercial Windows

  • SMART Utility

    SMART Utility is an application to scan the internal hardware diagnostics system of hard drives. SMART (Self-Monitoring, Analysis, and Reporting Technology) is a system built into hard drives by their manufacturers to report on various measurements (called attributes) of a hard drives operation. The attributes can be used to detect when a hard drive is having mechanical or electrical problems, and can indicate when the hard drive is failing. SMART Utility can read and display these attributes.

    Commercial Mac

    SMART Utility icon
  • Active@ Hard Disk Monitor

    Active@ Hard Disk Monitor is a disk utility that checks and monitors the status of your hard drives to help prevent data loss. The system is based on the Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.). This software monitors hard disk parameters such as Temperature, Head Flying Height and Spin-Up Time and notifies a user when a critical condition occurs. Disk Monitor also displays hard disk information, current S.M.A.R.T.

    Commercial Windows

    Active@ Hard Disk Monitor icon
  • Share this list of alternatives?

Platforms

Desktop

Show 2 less popular platforms