LedPreResistor icon
LedPreResistor icon

LedPreResistor

 Like

Calculates the series resistor for one or more LEDs, LED blink circuits (NE555, two-transistor multivibrator) and LED constant current sources (LM317, two transistors), with standard values, power rating and colour bands.

LedPreResistor screenshot 1

Cost / License

  • Free
  • Open Source (MIT)

Since

  • New

Updated

  • Updated Nov 2026

Platforms

  • Windows
  • Linux
Alternatives
0likes
0alternatives
0articles
Save

Features

Properties

Features

Highlights All activities

LedPreResistor News & Activities

Recent activities

LedPreResistor information

AlternativeTo Category

Education & Reference

GitHub repository

  •  0 Stars
  •  0 Forks
  •  0 Open Issues
  •   Updated  
View on GitHub
LedPreResistor was added to AlternativeTo by Thomas-St-ckli on and this page was last updated .

No comments or reviews, maybe you want to be first?

What is LedPreResistor?

LedPreResistor calculates the series resistor for one or more LEDs. It is the new edition of the freeware tool LED Pre-Resistor (Delphi 7, 2004), rebuilt from scratch in Lazarus: a single 64-bit exe for Windows, and since version 2.2 also a native Linux version (x86_64, GTK2). No installer, no extra packages.

  • Live calculation while you type: supply voltage, forward voltage, LED current and number of LEDs in series.
  • Several identical LED strings in parallel (since 2.4), each with its own series resistor; total current and total power are shown.
  • Nearest standard value from the E12, E24 or E96 series (always the next higher value, so the LED never gets more current than planned).
  • Real current and power in the resistor, in the LEDs and in total, plus a recommended resistor rating (1/8, 1/4, 1/2 or 1 W) with a warning above 50 % load and an estimated temperature rise.
  • Colour bands of the resistor (4 bands, 5 bands for E96) and a schematic with all values at the components.
  • Blink circuits (since 2.3): NE555 astable (times, frequency and duty cycle from R1, R2 and C, optional diode across R2) and a two-transistor multivibrator (on time of each LED from the base resistors and capacitors). Reverse mode suggests E12 resistors for a wanted frequency or on times. The LED preview blinks with the calculated timing, and the calculation steps are shown.
  • Constant current (since 2.4): LED constant current source with an LM317 or with two transistors. Sense resistor from the E series, power rating, minimum supply voltage, regulator loss and heatsink hint (LM317L or LM317), suggested transistor (BC547, BC337 or BD139). The supply voltage can be entered as a range (min/max) to show how little the current changes, compared with a plain series resistor.
  • "How it is calculated" panel that walks through the calculation step by step with your own numbers, explains the symbols used, and has a Copy button for the result and all steps as plain text.
  • Presets for red, yellow, green, blue, white and infrared LEDs, or your own forward voltage from the datasheet.
  • LED preview: a 5 mm LED in the chosen colour with anode, cathode and flat side labelled.
  • English and German user interface.