Bento3D

Bento3D is a web tool that allows you to create 3D printable dividers and toolboxes with millimeter precision.

Creating Data

• Size
• You can adjust the size using the sliders on the bottom left and right.
• You can switch between only partitions and including cases using the switch at the bottom right.
• Grid
• You can add grids from the + button on the right and bottom.
• You can also specify the width for the horizontal grid.
• Vertical grids are divided equally according to the height.
• Download
• The parts that will be STL output are displayed.

3D Printing

• Printing with the bottom facing down will result in a cleaner finish.
• Only the lid.stl (data of the lid part) requires support. Tree support is recommended.
• It is easier to succeed if you put support on the purple part in the lower left figure.
• Specify support for the inside of the part where the latch is inserted on the front and the outside of the hinge on the back.

Assembly

• In addition to the 3D printed parts, hardware is used for the case assembly.